Certified SOLIDWORKS® Solution Partner|Built for SOLIDWORKS and SOLIDWORKS PDM Professional|Free Community Edition, no key needed

Conversion guides

Convert SLDPRT to ACIS (SAT) from SOLIDWORKS

Convert SLDPRT to ACIS (SAT) from SOLIDWORKS with PDMPublisher. Batch every configuration and body of a part to SAT from the add-in or a PDM task.

ACIS (SAT) is the native exchange format of the kernel behind AutoCAD, Inventor and many CAM and analysis packages, and it often imports into those tools more cleanly than STEP. PDMPublisher writes one SAT per part, configuration and body in one run, in SOLIDWORKS or as a PDM Professional task.

Quick answer

  • Open the part, tick ACIS (sat) under File formats on the PDMPublisher tab, set a filename such as (FileNameWithoutExtension)-(Revision), select Publish.
  • Tick Convert multiple configurations and put (ConfigurationName) in the filename to get every configuration, not just the active one.
  • ACIS needs Premium in the add-in (the free Community Edition does PDF, DXF and STEP). The PDM task includes every format.

In SOLIDWORKS: step by step

Split bodies checkbox in the PDMPublisher Publish settings for exporting each body of a multi-body part to its own file
Split bodies writes one file per body and appends the body name to the filename.
  1. Open the part (or an assembly if you want all its parts).
  2. On the PDMPublisher tab, select Settings > Publish.
  3. Set Export location and Filename, for example (FileNameWithoutExtension)-(Revision). The .sat extension is added for you.
  4. Under File formats, tick ACIS (sat). Tick STEP or Parasolid too if the receiver wants a second format.
  5. For every configuration, tick Convert multiple configurations and add (ConfigurationName) to the filename. Use the Configuration Filter to include PROD* or exclude *Flat*.
  6. For one file per body, tick Split bodies.
  7. Select PDMPublisher > Publish, confirm the review dialog, and check Publishing results.

As a PDM task: on every release

PDMPublisher for PDM Professional runs the same engine as a task, so the export happens when the file changes state, not when somebody remembers.

  1. In PDM Administration, right-click Tasks > New Task, choose PDMPublisher, name it and tick the task hosts.
  2. On the Options page set Export Location, for example (VaultRootFolder)\Exports\ACIS (no trailing backslash), and the Filename.
  3. Tick ACIS (sat) under File Formats.
  4. Enable Convert multiple configurations and Split bodies as needed, with (ConfigurationName) in the filename.
  5. For release workflows, enable Get latest revision only, then attach the task to a workflow transition.

Settings that matter

SettingWhat to putWhy
Filename(FileNameWithoutExtension)-(ConfigurationName)Configurations do not overwrite each other.
Configuration FilterPROD* to include, *Flat* to excludeOnly the variants the receiver should see.
Split bodiesOn for multi-body partsOne file per body, body name appended.
Export location(VaultRootFolder)\Exports\ACIS, no trailing backslashCreated if missing; you need add and edit permission there.

Naming examples

  • (FileNameWithoutExtension)-(Revision) gives Bracket-B.sat.
  • (FileNameWithoutExtension)-(ConfigurationName) gives Bracket-Default.sat and Bracket-Machined.sat.
  • (VaultRootFolder)\Supplier Packages\($ProjectNumber)\(TargetExtension) in the task files each format in its own subfolder per project.

Customize Location (Premium in the add-in, standard in the task) gives each format its own folder from one job.

If something looks wrong

  • No ACIS entry in File formats: the add-in or task is older than version 2026.08.05. Update PDMPublisher on every computer that publishes.
  • Only the active configuration came out: Convert multiple configurations is off, or the filename has no (ConfigurationName).
  • ACIS is missing from the results: the add-in is running as Community Edition. Activate a Premium key under PDMPublisher > License Key, or use the PDM task.
  • The file imports oddly on the other side: PDMPublisher has no ACIS sub-options. SOLIDWORKS export settings under Tools > Options > Export apply where the job runs.
  • Nothing in the folder: you need add and edit permission in the export location. Target a subfolder, not the vault root.

Keep going

Documentation

Frequently asked questions

Can PDMPublisher export SOLIDWORKS parts to SAT?

Yes. ACIS (sat) is in the File formats list from version 2026.08.05. Tick it, set the export location and filename pattern, and Publish or run the PDM task.

How do I convert every configuration of a SLDPRT to ACIS?

Enable Convert multiple configurations and add (ConfigurationName) to the filename.

Can I get one SAT per body of a multi-body part?

Yes. Tick Split bodies; each body goes to its own SAT with the body name appended.

Which other formats were added with ACIS?

Version 2026.08.05 also added 3D XML, VRML, VDAFS, CATIA Graphics, HCG, HOOPS HSF, Microsoft XAML, JPEG, TIF, Adobe Illustrator and Adobe Photoshop outputs.

Where to next

PDMPublisher for SOLIDWORKS · PDMPublisher for PDM Professional · All features · Conversion guides · Pricing · Documentation · Contact

The SOLIDWORKS add-in is free to start as the Community Edition. The PDM Professional task comes with a 7-day trial. Download the add-in or start the task trial.