A SOLIDWORKS assembly leaves the building as STEP: customers on other CAD, contract manufacturers, simulation teams and plant designers all ask for it. PDMPublisher writes the whole assembly as one correctly named STEP, plus one per part and sub-assembly if you want, and a PDM Professional task does the same when the assembly is released.
Quick answer
- Open the assembly, tick STEP (step) under File formats on the PDMPublisher tab, set a filename such as
(FileNameWithoutExtension)-(Revision), select Publish. - Tick Export references to file formats individually to also get one STEP per part and sub-assembly.
- STEP is free in the Community Edition, up to 5 references per run; a bigger assembly needs Premium or the PDM task.
In SOLIDWORKS: step by step
One minute, start to finish. The video exports an open assembly to STEP from inside SOLIDWORKS; the steps follow.
- Open the top-level assembly (in a vault, Get Latest first so references resolve).
- On the PDMPublisher tab, select Settings > Publish.
- Set Export location and Filename, for example
(FileNameWithoutExtension)-(Revision). - Under File formats, tick STEP (step).
- Leave Export references to file formats individually off for one STEP of the whole assembly, or tick it for a STEP per part and sub-assembly too.
- For every configuration, tick Convert multiple configurations with
(ConfigurationName)in the filename. - Select PDMPublisher > Publish, confirm the review dialog, and check Publishing results.
As a PDM task: on every release
PDMPublisher for PDM Professional runs the same engine as a task, so the export happens when the file changes state, not when somebody remembers.
- In PDM Administration, right-click Tasks > New Task, choose PDMPublisher, name it and tick the task hosts.
- On the Options page set Export Location, for example
(VaultRootFolder)\Exports\STEP(no trailing backslash), and the Filename. - Tick STEP under File Formats. Keep Export affected document on so the assembly itself is exported.
- For the components too, set Template to a PDM BOM layout (name, configuration and quantity columns) and enable Export references to file formats individually.
- For release workflows, enable Get latest revision only, then attach the task to a workflow transition.
Settings that matter
| Setting | What to put | Why |
|---|---|---|
| Export references individually | On for a STEP per component | Beside the top-level STEP; in the task this needs a BOM Template. |
| Filename | (FileNameWithoutExtension)-(Revision) | Conveyor-B.step cannot be confused with Conveyor-C.step. |
| Convert multiple configurations | On, with (ConfigurationName) in the filename | Every assembly configuration, not just the active one. |
| Export location | (VaultRootFolder)\Exports\STEP, no trailing backslash | Created if missing; you need add and edit permission there. |

Naming examples
(FileNameWithoutExtension)-(Revision)givesConveyor-B.stepbeside the project.(FileNameWithoutExtension)-(ConfigurationName)givesConveyor-Short.stepandConveyor-Long.step.(VaultRootFolder)\Customer Packages\($ProjectNumber)\(TargetExtension)in the task files STEP in a step subfolder per project.
If something looks wrong
- Only the top-level STEP came out: Export references to file formats individually is off (in the task, the BOM Template is missing).
- Only the active configuration came out: Convert multiple configurations is off, or the filename has no
(ConfigurationName). - Community Edition stopped at 5 references: the assembly is bigger than the free limit. Premium or the PDM task removes it.
- Nothing in the folder: you need add and edit permission in the export location. Target a subfolder, not the vault root.
Keep going
Documentation
Frequently asked questions
How do I convert a whole SOLIDWORKS assembly to one STEP file?
Tick STEP under File formats, leave Export references to file formats individually off, set location and filename, then Publish. A PDM task does the same on a workflow transition.
Can I get the parts and sub-assemblies as separate STEP files at the same time?
Yes. Enable Export references to file formats individually. The add-in reads the resolved references; the task needs a BOM Template with name, configuration and quantity columns.
Is SLDASM to STEP free in PDMPublisher?
Community Edition publishes STEP, PDF and DXF free, up to 5 references per run. Larger assemblies need Premium; the PDM task is licensed per vault with a 7-day trial.
Can I export every configuration of an assembly to STEP at once?
Yes. Enable Convert multiple configurations, add (ConfigurationName) to the filename, and use the Configuration Filter to include or exclude by name.