A 3D PDF opens in Adobe Reader with rotate, zoom and section tools, which suits customers and shop-floor staff who will never install CAD. PDMPublisher writes one 3D PDF per part and configuration, and the drawing PDF beside it from the same job, in SOLIDWORKS or as a PDM Professional task.
Quick answer
- Open the part, tick 3D PDF – MBD (_3dpdf) under File formats on the PDMPublisher tab, set a filename such as
(FileNameWithoutExtension)-(Revision), select Publish. - Tick Convert multiple configurations and put
(ConfigurationName)in the filename to get every configuration, not just the active one. - 3D PDF – MBD needs Premium in the add-in (the free Community Edition does PDF, DXF and STEP). The PDM task includes every format.
In SOLIDWORKS: step by step

- Open the part (or an assembly if you want all its parts).
- On the PDMPublisher tab, select Settings > Publish.
- Set Export location and Filename, for example
(FileNameWithoutExtension)-(Revision). The._3dpdfextension is added for you. - Under File formats, tick 3D PDF – MBD (_3dpdf). Tick Adobe PDF (pdf) too for the drawing: on a part it exports the same-name drawing in the same folder.
- For every configuration, tick Convert multiple configurations and add
(ConfigurationName)to the filename. Use the Configuration Filter to includePROD*or exclude*Flat*. - Select PDMPublisher > Publish, confirm the review dialog, and check Publishing results.
As a PDM task: on every release
PDMPublisher for PDM Professional runs the same engine as a task, so the export happens when the file changes state, not when somebody remembers.
- In PDM Administration, right-click Tasks > New Task, choose PDMPublisher, name it and tick the task hosts.
- On the Options page set Export Location, for example
(VaultRootFolder)\Exports\3D(no trailing backslash), and the Filename. - Tick 3D PDF – MBD (_3dpdf) under File Formats.
- Enable Convert multiple configurations and Split bodies as needed, with
(ConfigurationName)in the filename. - For release workflows, enable Get latest revision only, then attach the task to a workflow transition.
Settings that matter
| Setting | What to put | Why |
|---|---|---|
| Filename | (FileNameWithoutExtension)-(ConfigurationName) | Configurations do not overwrite each other. |
| Configuration Filter | PROD* to include, *Flat* to exclude | Only the variants the receiver should see. |
| Two PDF outputs | _3dpdf for the model, pdf for the drawing | Tick one or both; they do not overlap. |
| Export location | (VaultRootFolder)\Exports\3D, no trailing backslash | Created if missing; you need add and edit permission there. |
Naming examples
(FileNameWithoutExtension)-(Revision)givesBracket-B._3dpdf.(FileNameWithoutExtension)-(ConfigurationName)givesBracket-Default._3dpdfandBracket-Machined._3dpdf.(VaultRootFolder)\Supplier Packages\($ProjectNumber)\(TargetExtension)in the task files each format in its own subfolder per project.
Customize Location (Premium in the add-in, standard in the task) gives each format its own folder from one job.
If something looks wrong
- The drawing PDF is missing: the add-in needs Bracket.SLDDRW beside Bracket.SLDPRT; in the task, enable Use PDM search to locate drawings.
- Only the active configuration came out: Convert multiple configurations is off, or the filename has no
(ConfigurationName). - 3D PDF – MBD is missing from the results: the add-in is running as Community Edition. Activate a Premium key under PDMPublisher > License Key, or use the PDM task.
- The file imports oddly on the other side: PDMPublisher has no 3D PDF – MBD sub-options. SOLIDWORKS export settings under Tools > Options > Export apply where the job runs.
- Nothing in the folder: you need add and edit permission in the export location. Target a subfolder, not the vault root.
Keep going
Documentation
Frequently asked questions
What is the difference between PDF and 3D PDF in PDMPublisher?
3D PDF – MBD (_3dpdf) exports the part model. Adobe PDF (pdf) on a part exports the same-name drawing in the same folder. Tick both to get both.
Can I convert every configuration of a SLDPRT to 3D PDF?
Yes. Enable Convert multiple configurations and add (ConfigurationName) to the filename; each configuration becomes its own 3D PDF.
Do I need SOLIDWORKS MBD to export 3D PDF with PDMPublisher?
PDMPublisher uses the 3D PDF export capability of the SOLIDWORKS installation running the job. A format that installation can’t write is dropped from the results.
Can a PDM task publish 3D PDF on a workflow transition?
Yes. Create a PDMPublisher task with _3dpdf ticked under File Formats and attach it to the transition.