Reviewers, buyers and shop-floor staff open eDrawings without SOLIDWORKS, and an EASM lets them take the assembly apart, measure and mark up. PDMPublisher writes one EASM for the assembly, with an EPRT per part if you want, in SOLIDWORKS or as a PDM Professional task.
Quick answer
- Open the assembly, tick eDrawings Assembly (easm) under File formats on the PDMPublisher tab, set a filename such as
(FileNameWithoutExtension)-(Revision), select Publish. - Tick Export references to file formats individually to also get one file per part and sub-assembly.
- eDrawings Assembly needs Premium in the add-in (the free Community Edition does PDF, DXF and STEP). The PDM task includes every format.
In SOLIDWORKS: step by step
- Open the top-level assembly (in a vault, Get Latest first so references resolve).
- On the PDMPublisher tab, select Settings > Publish.
- Set Export location and Filename, for example
(FileNameWithoutExtension)-(Revision). The.easmextension is added for you. - Under File formats, tick eDrawings Assembly (easm). Tick eDrawings Part and eDrawings Drawing too if the same profile serves parts and drawings.
- Leave Export references to file formats individually off for one file of the whole assembly, or tick it for one per part and sub-assembly too.
- For every configuration, tick Convert multiple configurations with
(ConfigurationName)in the filename; exclude*Flat*in the Configuration Filter. - Select PDMPublisher > Publish, confirm the review dialog, and check Publishing results.
As a PDM task: on every release
PDMPublisher for PDM Professional runs the same engine as a task, so the export happens when the file changes state, not when somebody remembers.
- In PDM Administration, right-click Tasks > New Task, choose PDMPublisher, name it and tick the task hosts.
- On the Options page set Export Location, for example
(VaultRootFolder)\Exports\EDRAWINGS(no trailing backslash), and the Filename. - Tick eDrawings Assembly (easm) under File Formats. Keep Export affected document on so the assembly itself is exported.
- For the components too, set Template to a PDM BOM layout (name, configuration and quantity columns) and enable Export references to file formats individually.
- For release workflows, enable Get latest revision only, then attach the task to a workflow transition.
Settings that matter
| Setting | What to put | Why |
|---|---|---|
| Export references individually | On for one file per component | Beside the top-level file; in the task this needs a BOM Template. |
| Filename | (FileNameWithoutExtension)-(Revision) | Conveyor-B cannot be confused with Conveyor-C. |
| Convert multiple configurations | On, with (ConfigurationName) in the filename | Every assembly configuration, not just the active one. |
| Measure and properties | Task version 2026.08.12 or later | The task saves measurable files with properties regardless of the host account’s eDrawings preferences. |
| Export location | (VaultRootFolder)\Exports\EDRAWINGS, no trailing backslash | Created if missing; you need add and edit permission there. |

Naming examples
(FileNameWithoutExtension)-(Revision)givesConveyor-B.easm.(FileNameWithoutExtension)-(ConfigurationName)givesConveyor-Short.easmandConveyor-Long.easm.(VaultRootFolder)\Customer Packages\($ProjectNumber)\(TargetExtension)in the task files each format in its own subfolder per project.
If something looks wrong
- Reviewers cannot measure the file: in the task, update PDMPublisher to 2026.08.12 or later on every host; in the add-in, check the eDrawings options of the running SOLIDWORKS.
- Only the top-level file came out: Export references to file formats individually is off (in the task, the BOM Template is missing).
- Components are missing: the job needs local copies of every reference. Get Latest first. Suppressed, virtual and excluded-from-BOM components are skipped on purpose.
- eDrawings Assembly is missing from the results: the add-in is running as Community Edition. Activate a Premium key under PDMPublisher > License Key, or use the PDM task.
- Nothing in the folder: you need add and edit permission in the export location. Target a subfolder, not the vault root.
Keep going
Documentation
Frequently asked questions
How do I batch export SOLIDWORKS assemblies to eDrawings?
Tick eDrawings Assembly (easm) under File formats, set location and filename, and Publish with the assembly open. A PDM task does the same on a workflow transition.
Why can’t the recipient measure my exported EASM file?
Measurement must be allowed when the file is saved. The PDM task (2026.08.12 and later) enables it automatically; the add-in follows the eDrawings options of the running SOLIDWORKS.
Can I get an eDrawings file for each part of the assembly?
Yes. Tick eDrawings Part too and enable Export references to file formats individually; parts become eprt, sub-assemblies easm.
Can I export every configuration of an assembly to eDrawings?
Yes. Enable Convert multiple configurations and put (ConfigurationName) in the filename.